The Kontrol automatic pH controller will take care of measuring the pH and automatically dosing the pH regulator – when necessary until the selected value is reached.
Through one of the 2 silicone tubes, the pH minus liquid is collected and injected into the water tank through the other silicone tube.
The Kontrol automatic pH controller includes:
- Digital pH meter with peristaltic pump: It continuously measures the pH value and pumps the pH- from the bottle to the tank. It is calibrated to one point. Measurement range: pH 4 to pH 8. precision 0,1.
- Remote pH probe: It is inserted into the nutrient solution tank.
- Plastic tube: To connect to the bottle of pH-. Includes a special weight to attach to the end of the tube ensuring that the pH is sucked up - even when little is left.
- Plastic tube: To put in the tank and dose the necessary pH regulator to correct the pH. It includes an adapter that allows you to optionally connect it to an irrigation system.
- Bracket to hang on the wall
The Kontrol automatic pH controller only works with pH –
Growlet tip:
Inject the pH – close to the probe of the meter so that you immediately notice the entrance of the regulating liquid.
Use a recirculation pump so that the deposit is mixed well as soon as possible and thus achieve the desired value more quickly.
Ratings
Not yet reviewed