The Atman 101 submersible irrigation pump can be used for hydroponic cultivation systems or for automatic irrigation systems.
The pump is submerged in the water tank and the irrigation pipe is connected to it, which will take the water where we want it.
If we want to automate irrigation, for example on land, we would only need a few Jellyfish, a 16mm tube and a digital timer.
Assembly would be very simple; it is only to introduce our pump in the tank with a pipe and a final plug in it.
Then we just need to stick our jellyfish in the pipe and connect the pump to the timer.
For cultivation on land, it is convenient to use a digital timer and not an analogue one; for allowing us to program the ignition of the pump on alternate days and thus not excessively puddle the water.
The main characteristic of the pump is that it takes the water from the bottom; this way we make much better use of the water in the tank.
Another good thing about this pump is the flow regulator that allows us to adjust the amount of water that the pump doses.
Main features of Atman 101 submersible irrigation pump
- Flow rate: 350 l / h.
- Power: 5 W.
- Maximum height of the water: 1 m.
- Outlet for 16 mm pipe.
Ratings
Not yet reviewed