,

Water Master 1000 Pump

29,90  VAT included

The Water Master 1000 submersible irrigation pump is responsible for driving irrigation water from an irrigation tank through the irrigation pipe to the drippers to water the plants, either in an automatic irrigation system or in a cultivation system. hydroponic.

Being submersible, the pump goes into the water in the tank and from there the irrigation pipe comes out.

The flow rate of the Water Master 1000 submersible pump is 1000 liters per hour, so it is recommended to use it in cultivation areas of up to 1,2 m2.

The outlet mouth of the pump is 16 mm. so you must take irrigation pipe of this diameter.

The Water Master 1000 liters per hour pump is used to push water from a tank through a 16 mm irrigation pipe. whether to make an automatic irrigation system or a hydroponic system.

With an irrigation pump, pipe, tank, pegs and a timer you can make an automatic irrigation system and forget about watering.

Thanks to its large flow rate, it generates enough pressure so that the drippers in small crops do not clog, releasing irrigation water precisely.

This model is equipped with a thermostat that automatically shuts off the motor if it overheats during use.

 

Features of the Water Master 1000 pump:

  • Flow rate: 1000 l / h.
  • Power: 22 W.
  • Maximum Height: 1,6m.
  • Outlet for 16 mm pipes.

 

Growlet tip:

In order to extend the life of the pump, we recommend the use of a irrigation pipe filter to keep it in perfect condition.

Another of the main applications that the irrigation pump has is to remove the nutrients from a deposit so that they are well mixed.

You just have to put the pump inside the irrigation tank and turn it on without pipes so that it creates a continuous current inside the tank and thus everything is well mixed.

Ratings

Not yet reviewed

Be the first to review “Water Master 1000 Pump”
Shopping Cart
Scroll to start