Automatic ambient humidity controller

How is the Cornwall humidity controller used?

1. To use the humidity controller in humidifier control mode, being the device in OFF, we must press the power button and the button with the arrow down until the drawing of some drops appears.
2. Next we mark the degree of humidity.
3. In this case, when the real humidity is below what we have marked on the controller, it will give way to the current, making the connected device work, normally a humidifier.
4. As soon as the humidity rises more than what we have set, the power will be cut off and the humidifier will stop working.

1. To use the dehumidifier control mode, With the device in OFF, we must press the power button and the button with the arrow down until the drawing of some flames appears.
2. Next we mark the degree of humidity.
3. In this case, when the real humidity is above what we have marked on the controller, it will give way to the current, making the device that we have connected work, normally an air extractor or a dehumidifier.
4. As soon as the humidity drops below what we have marked, the power will be cut off and the extraction or dehumidifier will stop working.
5. The humidity controller has the humidity sensor inside the device, so the controller must be inside the crop to take the correct humidity measurement.

Controller Technical Specifications:

• Voltage: 230V / 50Hz
• Load (Max): 16A – 3.680W
• Controllable humidity range: 30% to 90%
• Accuracy: + 10%
• LED status indicator
• Integrated and rechargeable battery

Here we leave you a product video.

Subscribe to our newsletter

Enter your email address: * Invalid email address.

Thanks for subscribing.

x

An error occurred during your registration.

x