The automatic temperature controller is used to turn on and off the devices connected to it according to the ambient temperature.
Its use is simple, plug it into the light, connect the extractor/intractor or whatever you want and select the temperature you want to have in the crop.
It is a professional tool to maintain a stable climate, save electricity and increase the life of appliances.
It has two functions, heating control mode and air conditioning control mode.
How is the Cornwall temperature controller used?
- To use the heating control mode, being the device in OFF, we must press the power button and the button with the arrow down until the drawing of some flames appears.
- Next we mark the temperature that we want to have.
- In this case, when the real temperature is below what we have marked on the controller, it will give way to the current, making the device that we have connected work, normally a heater.
- As soon as the temperature rises more than what we have set, the current will be cut off and the heating will stop working.
- To use the air control mode, With the device in OFF, we must press the power button and the button with the arrow down until the drawing of a fan appears.
- Next we mark the temperature that we want to have.
- In this case, when the real temperature is above what we have marked on the controller, it will give way to the current, making the device that we have connected work, normally an air extractor or an air conditioner.
- As soon as the temperature drops below what we have marked, the current will be cut off and the extraction or air will stop working.
- The temperature controller has the temperature sensor inside the device, so the controller must be inside the crop to take the correct measurement.
Technical Specifications:
- Voltage: 230V / 50Hz
- Load (Max): 16A – 3.680W
- Controllable temperature range: from 0 to 40ºC
- Accuracy: + 1ºC
- LED status indicator
- Integrated and rechargeable battery
Ratings
Not yet reviewed