,

90º drainage cultivation table

9,90  VAT included

The 90º elbow or L-shaped drain for cultivation tables is a drain that is made up of two parts that are screwed together in the area of ​​the small tray deposit, leaving the table in the middle.

Thanks to the rubber gasket, the exit of the excess water from the tray is sealed and without losses, to channel it towards the outlet.

The 90º elbow or L-shaped drain connects to 25mm irrigation pipes. in diameter in a simple and hermetic way, thanks to its pressure threaded connection that, once tightened, leaves a perfect connection without leaks.

Remember to check the drains between harvests to check that they drain well and avoid possible flooding.

We recommend the use of a filter on the cultivation table.

The 90º cultivation table drain will allow us to direct excess water from the irrigation of our danish table back to the general deposit, or discard it

This is a screw-on plastic accessory that allows the water collected by the tray to be channeled into a 25 mm pipe. so that you can take it to the point you want.

 

 

How do you connect the 90º grow table drain?

 

The first part is introduced above the cultivation table.

Thanks to its rubber gasket, the connection is watertight.

The other part is screwed through the lower part of the cultivation table to the first piece.

To this second piece we will connect the drainage pipe of the irrigation table.

 

Ratings

Not yet reviewed

Be the first to review “90º drainage growing table”
Shopping Cart
Scroll to start