The new 2 liter Ai SolventVap series rotary evaporators come with a modular hot water bath, vertical glassware and digital temperature/rotation control. Its optimized bath volume allows for fast heating times. The condenser unit has specially designed glass tubes that use the surface area extremely efficiently. That's why SolventVap evaporators consistently deliver reliable and reproducible process results that are often reserved for more expensive systems.
Another important aspect of the SolventVap is the safety features, which include dry-running protection, water bath overtemperature shutdown protection, and electrical surge protection.
The rotary evaporator features a worm gear motor, which provides constant rotation at speeds from 10 to 180 rpm.
When the flask containing the solvent is rotated, it continuously transfers a thin layer of liquid over the entire internal surface. This gives a very large surface area for evaporation, which is caused by the gentle heating of the hot water bath.
The rotation system is provided with a special seal that allows the apparatus to be placed under vacuum, effectively reducing the boiling point of the solvents and eliminating the vapor phase, making the process much more efficient.
Each unit is also equipped with an easy-to-use vacuum release system and continuous feed system, which allows solvent to be constantly drawn into the flask without the need to stop operation.
The digital hot water bath operates from room temperature to 99°C with PID temperature control in 0,1°C increments. The heating coils are located directly inside the pan for the most efficient heating possible. A built-in overheat protector will shut off the power, if the regulator fails.
Standard Glass Flask: 2 liter pear shaped evaporating flask, 1 liter round bottom receiving flask and vertical condenser.
Features of rotary solvent evaporator:
Solvent resistant PTFE and Viton seals ensure long life.
Specialized extremely compact worm gear motor provides precise drive for very quiet, vibration-free operation.
Downward condensing vacuum port design ensures safe vacuum operation.
Modular design (individual rotary modules and water bath modules) to facilitate future upgrades.
Easy multi-level manual lift with secure lock for the evaporating flask.
Simple and direct visual operation with digital display of speed and temperature.
The PID temperature regulator ensures precise control of the hot water temperature.
Technical characteristics of the rotary solvent evaporator:
electrical requirements
220V 50/60Hz single phase, 4.9A, 1075 watts
(Heater: 1050 Watts, Rotation Motor: 25 Watts)
Glass material High borosilicate glass 3.3
evaporation flask
Capacity: 2 liters
Maximum load: You must not exceed 60% of the capacity of the flask
Rotation speed: 10 to 180 rpm
Evaporation rate: 20 ml per minute
Lift: Manual weight balance control with lock
Maximum lifting distance: 10,15 cm. (extendable to 25,4 cm.)
Receiver bottle: 1 liter
Condenser glassware: Vertical with double spiral glass tube
Coolant Fluid Connection: 3/8" x 2 Hose Barb
Vacuum connection: 3/8" hose barb x 1
Work environment
-15 to 35ºC
Water bath
Temperature Range: Ambient to 99°C
Temperature regulator: digital
Capacity: 7,55 liters
Material: Stainless steel
Dimensions: 25,4 cm diameter x 12,7 cm deep x 24,75 high
Media: water
Number of heaters: one
Emptiness
Connection: 3/8" x 1 hose barb (at condenser)
Sealing: PTFE + Vinton seals
Final vacuum: <3 torrs
Unit weight: 9,5kg.
Unit dimensions: 55,8 x 31,75 x 66 cm.
Warranty One year warranty on the unit, excluding glassware and all gaskets.
Ratings
Not yet reviewed