We use the Qnubu Rosin 2×4″ mold to carry out a cold pre-pressing of the buds before extracting them in our rosin press.
With this Pre-Press you can quickly compress your dry plant material to obtain a solid, compacted block with great weight. The pressed blocks are the ideal size for use with Qnubu Rosin Press extraction bags. Or to store them in conservation bags until they are to be used.
The way to use the Qnubu Pre Press mold is very simple. You just have to crimp the flat piece that makes the base with the rectangular middle part and your mold will be ready to be filled. Once filled to the top with your favorite flowers, close the mold with the third piece, now you have to exert pressure, for this you can use your strength by squeezing the mold with your hands, or use any suitable tool for this purpose, as they can be the extraction press itself without heat on the plates.
We recommend maintaining the pressure for 1 minute so that the bricks of vegetable matter are well compacted.
Thanks to using the mold we can increase the performance of each Rosin bag by up to 20%.
The mold opens both at the top and at the bottom so that the brick can be easily removed after cold pressing.
Normally the grass is pressed without a bag to obtain a perfect brick.
Then we will take this brick and put it in a filter bag or tea bag with which we will finally press it hot.
Remember to pick a non-stick paper of quality to be able to collect the resulting resin without it sticking everywhere.
Qnubu Rosin Mold Specifications:
- Material : Anodized Aluminum
- Internal dimensions: 2×4″ (5,08 x 10,16cm)
Discover how to make rosin Like the pros with our step-by-step guide and a few tricks.
You can check all the manufacturer's items on the official website of Qnubu
Ratings
Not yet reviewed