The Indizono 2.0 Duct Ozonizer is a device capable of transforming the oxygen (O2) in the air into ozone (O3).
Its operation is based on the production of electrical discharges that energetically activate the atoms of the oxygen molecule, uniting them three by three through its ceramic plate.
The new version 2.0 of the Indizono house comes with a hermetic side door to facilitate the replacement of the ceramic plates. In the previous model we had to remove the ducts to replace the plates and in this way we save a lot of time and work.
How is the Indizono duct ozonator installed?
- The ozonator is installed in the extraction tube.
- Always after the extractor.
- Look at the air direction arrow on the side of the ozonator.
- Leave at least 5 meters of tube after the ozonizer so that it can eliminate the odor well.
Remember that the more distance the tube has from the ozonator to the end point of the outlet, the better it will work and eliminate the odor.
If you put an active carbon filter before the ozonator, it will protect the plates from dust and help improve the efficiency of the ozonator.
Characteristics of the Indizono 2.0 ozonator by diameter:
- Diameter 150 mm.
- Maximum Flow: 3000 m3/h.
- Consumption: 30W.
- Ozone production: 3500 mg.
- Diameter 200 mm.
- Maximum Flow: 6000 m3/h.
- Consumption: 60W
- Ozone production: 7.000 mg/h
- Diameter 250 mm.
- Maximum Flow: 7000 m3/h.
- Consumption: 60W
- Ozone production: 7.000 mg/h
- Diameter 300 mm.
- Maximum Flow: 10000 m3/h.
- Consumption: 90W
- Ozone production: 10.500 mg/h
You can visit the manufacturer's page unzoned.
We recommend adding a carbon filter extraction to increase the efficiency of the ozonator.
Ratings
Not yet reviewed