,

Automatic irrigation system Blumat for deposit (1 plant)

4,75  VAT included

The individual ceramic cone from the Blumat house is an automatic irrigation system that uses the porous stone technique to supply the necessary water to the plants during your absence.

First, fill with water and seal each Blumat cone. The suction tube must be free of air, purge the air bubbles from the tube by immersing it in the water.
Place the cones in the pots and join them with 8mm pipe. in series to the water tank you have chosen. The larger the tank, the longer the irrigation will last.

As the soil dries out, the ceramic cone distributes the water little by little into the soil creating a negative pressure inside the cone.

The underpressure causes water to be sucked in from the nearby water container.

El cone ceramic individual of the house blumat is a automatic irrigation system It is very simple to use and provides the plants with the necessary water, without excess water, thanks to its flow compensation based on soil moisture.

To use it as a regular system for a crop, it must be taken into account that mineral fertilizers should be used that dissolve better in water so that the pores of the ceramic cone do not become clogged with traces of fertilizer.

In any case, always clean between harvests with hot water.

 

Growlet tip:

If you place the tank a little higher than the pots, the amount of water that will come out of the Blumat cone will be greater than if you leave the tank at the same level. This is very interesting because it depends on the size of the pot or the plant itself, you must adjust the irrigation and this is a good way to do it with this system.

Do you want to see it in action?

Ratings

Not yet reviewed

Be the first to review “Blumat Automatic irrigation system for tank (1 plant)”
Shopping Cart
Scroll to start